Easy SA

• MC-KB 330.01, low-cost operator panel 330 x 80 mm, IP65, with fixed legends to control your machines-tools equipped with a CNC or with a PLC. It includes 7 LED illuminated flat keys, 1 "mushroom" emergency switch, 1 Gray-coded 16 positions selector.
  

• MC-KB 330.02, low-cost operator panel 330 x 80 mm, IP65, with fixed legends to control your machines-tools equipped with a CNC or with a PLC. It includes 7 LED illuminated flat keys, 1 "mushroom" emergency switch, 1 Gray-coded 16 positions selector and 1 electronic handwheel of 100 pulses/rev.
  

• MC-KB 290, operator panel 290 x 200 mm, IP65, with areas for interchangeable legends and Fanuc IO Link interface to control your machines-tools equipped with Fanuc CNC. It includes 45 LED illuminated flat keys, 1 "mushroom" emergency switch, 2 key switches with different lock, 4 pulse or stepper illuminated push buttons, 2 Gray-coded 16 positions selectors, 1 box with cover for the RS232 connector, 1 connector for the external use of the inputs-outputs not used by the operator's panel.
  

• MC-KB 290W, operator panel identical to the MC-KB 290 with protection cover for the push-buttons and keys.
  

• MC-KB 400, operator panel 400 x 200 mm, IP65, with areas for interchangeable legends and Fanuc IO Link interface to control your machines-tools equipped with Fanuc CNC. It includes 45 LED illuminated flat keys, 1 "mushroom" emergency switch, 2 key switches with different lock, 9 pulse or stepper illuminated push buttons, 2 Gray-coded 16 positions selectors, 1 box with cover for the RS232 connector, 1 connector for the external use of the inputs-outputs not used by the operator's panel.
  

• MC-KB 520, operator panel 520 x 200 mm, IP65, with areas for interchangeable legends and Fanuc IO Link interface to control your machines-tools equipped with Fanuc CNC. It includes 60 LED illuminated flat keys, 1 "mushroom" emergency switch, 2 key switches with different lock, 13 pulse or stepper illuminated push buttons, 2 Gray-coded 16 positions selector, 1 box with cover for the RS232 connector, 1 connector for the external use of the inputs-outputs not used by the operator's panel.
  

• MC-KB 520.02, low-cost operator panel 520 x 200 mm, IP65, with areas for interchangeable legends and Fanuc IO Link interface to control your machines-tools equipped with Fanuc CNC. It includes 73 LED illuminated flat keys, 1 "mushroom" emergency switch, 2 key switches with different lock, 13 pulse or stepper illuminated push buttons, 2 Gray-coded 16 positions selectors, 1 connector for the external use of the inputs-outputs not used by the operator's panel.
  

• MC-KB RT, low-cost operator panel 200 x 200 mm, IP65, with areas for interchangeable legends and Fanuc IO Link interface to control your machines-tools equipped with Fanuc CNC. It includes 1 display 4 * 40 characters, 33 LED illuminated flat keys. The texts and the configuration are loaded by an RS232 serial line.

• MS-FC ST is a desktop version of the frequency converter for the controlling of the synchronous micro-motors (brushless and sensorless), used in the mircro-spindles for manual machining. Electric connections at the back
  - Power: 160 W
  - Speed: adjustable between 5'000 and 80'000 turns per minute
  

• MS-FC LF is one of the model of the frequency converter which can be connected on machines-tools for the controlling of the synchronous micro-motors (brushless and sensorless), used in the mircro-spindles for manual machining
  - Fixing by the frontal plate
  - Electric connections at the back
  - Power: 160 W
  - Speed: adjustable between 5'000 and 80'000 turns per minute
  

• MS-FC LB is one of the model of the frequency converter which can be connected on machines-tools for the controlling of the synchronous micro-motors (brushless and sensorless), used in the mircro-spindles for manual machining
  - Fixing by the basic plate
  - Electric connections at the back
  - Power: 160 W
  - Speed: adjustable between 5'000 and 80'000 turns per minute
  

• MS-FC SW offers in complement to the MS-FC frequency converter the possibility of alternative control of 4 spindles with only one frequency converter.
  - Fixing by the basic plate
  - Electric connections at the front
  

Motion

• MC-SMC is an intelligent servo-amplifier for the controlling of step by step motors from simple 24V inputs-outputs with 4 positions free programmable, 2 positions controlled by sensors, adjustable speed and acceleration and the possibility to change the settings during operation. MC-SMC was especially developped to favourably replace some pneumatic or hydraulic systems in offering more flexibility and comfort.
  

• NCTEC, the workshop CAD/CAM, simple to use, with or without postprocessor and with all the tools for the programming of the CNC machines tools of turning and milling.
  

• DCom, a Windows software, simple and efficient for the management of CNC programmes with :
  

• DCom-kit, DCOM software with connection cables and adapters
  

• MC-PG 60, electronic hand wheel of 60 mm diameter, with a balls mechanism for an impulse by impulse feed. The electronic hand wheel generates two digital standard TTL (5 Vdc) signals, out of phase of 90° with a resolution of 100 pulses by turn.
  

• MC-PG 80, electronic hand wheel of 80 mm diameter, with a balls mechanism for an impulse by impulse feed. The electronic hand wheel generates two digital standard TTL (5 Vdc) signals, out of phase of 90° with a resolution of 100 pulses by turn.
  

• WIR 011, 25 poles m/f cable, 3 meter length
  

• WIR 023, 25 poles m/f cable, 4.5 meter length

• WIR 012, 25p m / 9p f adapter
  

• WIR 014, 25p m / 25p f adapter for Fanuc CNC
  

• WIR 015, 25p m / 25p f adapter for Siemens CNC